Medical Hospital Psa Oxygen Generator Use Medical Portable Oxygen Cylinder Oxygen Cylind Medical

• Customization: Available
• Warranty: 2years
• Certification: ISO9001, CE
• Model NO.: HY-224
• Noise Level: Low
• Voltage: 220V
• Purity: >94.5%
• Valves: Screw Type
• Design Pressure: 0.8MPa
• Filling Pressure: 200bar
• System Design Service Life: 10-15 Years
• Explosion Proof Requirements for System: Non Explosion Proof Design
• The Degree of Automation of System Desig: Automatic Unattended
• The Device Has Capacity Expansion Capaci: 10% Design Margin
• Flexibility of System Operation: Adjustable Within The Rated Range
• Transport Package: Cartons or Pallet
• Specification: 50m3 / h
• Trademark: HOYO
• Origin: Hefei, China
• HS Code: 90192000
• Production Capacity: 2000PCS/Year

Product Description

 PSA oxygen generation system  Oxygen high pressure cylinder Medical GradeThe altitude is more than 1000 meters Purity: ≥ 93%, flow rate: 50m3 / h,  (pressure:200barAutomatic filling system)
design parameters
Technical index of terminal product gas:

1	Product gas:	Oxygen (O2)
2	Gas production capacity:	50Nm3/h
3	Oxygen purity:	93%
4	Oxygen recovery rate:	≥40%
5	Oxygen dew point:	≤-45ºC
6	Operation mode:	Automatic unattended control
7	Detection method of oxygen content:	On line detection
8	The device has capacity expansion capacity:	10% design margin
9	Flexibility of system operation:	Adjustable within the rated range
10	Valves:	Screw type
12	Design pressure:	0.8MPa
13	System operating pressure:	≤ 5bar (adjustable according to customer's site requirements)
14	Filling pressure:	200bar
15	System pressure loss:	≤ 5% (pressure loss at inlet and outlet)
16	System design service life:	10-15 years
19	Explosion proof requirements for system design:	Non explosion proof design
20	The degree of automation of system design is as follows	Automatic unattended

System utility requirements:

name	Voltage	power
screw compressor	3Ph,220V,60HZ	90KW
Freeze dryer	3Ph,220V,60HZ	3.5KW
oxygenerator	1Ph,220V,60HZ	0.2KW
Oxygen booster	3Ph,220V,60HZ	18.5KW
total		113.2KW
It takes two tons of water to circulate

Executive standard

production	Oxygen generator: according to jb6427 / 92 standard Pressure vessel: according to GB 150-1998 standard Welding: according to JB / t4709-92 standard Wire arrangement and installation: Standard gb5226-96 Iso9001:2016 certification Iso13485:2016 certification CE EU certification
inspect	Oxygen content detection: range: 21% ~ 98% Flow test: flowmeter Acceptance standard: according to the contract and the buyer's requirements Before acceptance, it can be installed and debugged on site.

warranty period and after-sales service commitment

1. Warranty period
1) The warranty period of the oxygen generation system shall be 12 months from the commissioning of the user's factory, or 18 months from the date of signing the contract, whichever comes first;
2) The service life of the main parts of the equipment, i.e. pneumatic valve and special molecular sieve for oxygen generation, shall not be less than 5 years. During this period, if the equipment fails to meet the technical indexes specified in the contract due to the quality problems of pneumatic valve and special molecular sieve for oxygen generation, Party B shall be responsible for repairing or replacing the new pneumatic valve and special molecular sieve for oxygen generation free of charge.
3) During the warranty period, the supplier shall bear the cost of repairing or replacing the oxygen making equipment and parts provided by Party B due to quality problems, and the user shall bear the cost of repairing or replacing the equipment due to wrong operation and improper use. After the expiration of the warranty period, the supplier shall provide lifelong equipment maintenance service, and ensure the smooth supply of accessories and preferential prices.
2. After sales service
Standardized procurement, inspection, test and commissioning
Passed ISO9001 quality management system certification
Passed ISO13485 medical device quality management system certification
Pass CE EU certification
In case of rework or equipment damage caused by errors in our company's drawings, data and technical documents or on-site guidance of technical service personnel, our company shall immediately be responsible for free repair or replacement. Our company will not be responsible for repairing or replacing the spare parts, and will immediately terminate the warranty period if it is not caused by the information provided by our company, spare parts or technical service personnel's on-site guidance error.
Establish user electronic files to assist users in equipment management


FAQ
Q1. What is the advantage about your company?
A1. Our company has professional team and professional production line.
 
Q2. Why i should choose your products?
A2. Our products are high quality and low price.
 
Q3. Any other good service your company can provide?
A3. Yes,we can provide good after-sale and fast delivery.
 
Pls feel free to contact us if you are interested!!! Will always try to reply you within 24 hours after receiving your enquiry.

We are sure we can satisfy you with our full product range, professional knowledge & best after sales support.